Hot Products
0102030405
SHBF700 Enhanced General Purpose Inverter from China Suppliers - High-Performance Motor Control Factory
Application Industry
Standard Configuration
- "Dual digital display" keyboard
- 485 communication, support Ethernet extension cable
- 5 digital input terminals, support 100KHz pulse signal, support input signal polarity selection
- One relay output
- Support one 100KHz pulse signal output, support parameter setting "two relays", multi-functional expansion interface supports "eight relays"
- 3 channels of analog input, AI1 and AI2 are independent, both support current 0/4-20mA or voltage 0~10V input, AI3 fixed panel potentiometer
- One channel of voltage and current analog output
- Provide +10V and +24V two-way power supply at the same time
- Brake unit
- Simple PLC, support PID modification setting
- Sixteen-stage speed control
- 4 groups of acceleration and deceleration time settings
- VF mode, support fire emergency EPS
- Jump frequency mode, frequency detection
- High frequency output, support 3000Hz
- Run/ stop timing
- Use time timing, support random password release, avoid malicious arrears
- External temperature detection, support constant temperature control
- The whole series of models will not explode in short circuit, input and output phase loss protection + conventional function protection
- Support switching of parameter positions between main display and auxiliary display, and support arbitrary selection of display target content
- One drag four constant pressure + auxiliary pump function, support arbitrary selection mode
- Integrated one drag four constant + auxiliary pump operation status display
- Support low-power single-phase 220V boost three-phase 380V
- Support modification or addition of functional items, focus on meeting specific users and partners, customize differentiated special products, and facilitate coverage of wider market needs.
Running Control
Control mode: Linear V/F control, square V/f control, V/F separation mode, SVPWM modulation
Overload capacity: G model: 150% overload for 60s, 180% overload for 3s; P model: 120% overload for 60s, 150% overload for 3s
Carrier frequency: 1.0KHz ~ 8.0KHZ
Functional Application
- Frequency setting method: digital setting, analog setting, serial communication setting, multi-stage speed, PID setting, etc.
- Simple PLC application, PID control function
- Professional-level constant pressure water supply/ constant temperature control application, automatic sleep and wake-up can be set arbitrarily
- Multi-stage speed control function: 8-stage speed control, 16-stage speed control
- 4 sets of linear acceleration and deceleration time, which can be switched according to requirements, the highest resolution is 0.01s
- Shortcut multi-function keys, user-definable multi-function shortcut keys
- The software current limiting/ overvoltage function can be set to keep the output current not exceeding the limit according to the load change and avoid frequent alarms
- Automatic voltage adjustment function: when the grid voltage changes, it can automatically keep the output voltage constant
- Provide dozens of various fault protection functions: short circuit, software current limit, fast current limit, software overcurrent, overtemperature, overvoltage, undervoltage, Input/ output phase loss protection function
- Equipped with dual digital display keyboards as standard, two keyboards can be connected at the same time, and the keyboard type is automatically identified to support hot swapping
- Independent trial time timing
Input and Output Range
- Input voltage range: single-phase 220V / three-phase 220V / three-phase 380V / three-phase 480V ±15%
- Input frequency range: 47 ~ 63Hz
- Output voltage range: 0 ~ rated input voltage
- Output frequency range: 0.00Hz ~ 300.00Hz or 300.0Hz ~ 3000.0Hz two frequency output
Peripheral Interface Features
- Programmable digital input: 5 digital inputs (one of which supports high-speed pulse input)
- Programmable high-speed input: up to 100KHz pulse input
- Programmable analog input: 3 AI analog inputs; AI1 is the same as AI2: 0~10V or 0/4~20mA input, AI3: fixed as panel potentiometer
- Analog output: 1 output, 0~20mA or 0~10V output can be selected respectively
- Relay output: 1 independent output, contact load capacity 250VAC 3A
- Programmable extension relay output: supports up to 100KHz pulse output, and supports parameter setting as collector open-drain switch output
- Communication interface: 1 channel 485 modbus communication interface
- Digital input supports two kinds of signal input: sink type (NPN) / source type (PNP)
- External temperature detection: support 0~5V / 0~10V / 4~20mA temperature transmitter temperature display / temperature control
- Expansion interface: 8-way breaker can be expanded, and functions can be customized according to requirements
Frequency Inverter Series
| Model No. | Input rated voltage (V) | Rated output power (KW) | Rated output current (A) | Dimension (mm) | Remark |
|---|---|---|---|---|---|
| SHBF400-02S0.75G | Single phase 220V ±15% | 0.75KW | 4A | 155.5X85X106 | A |
| SHBF700-02S1.5G | 1.5KW | 7A | 155.5X85X106 | ||
| SHBF700-02S2.2G | 2.2KW | 9.6A | 155.5X85X106 | ||
| SHBF700-02S3.7G | 3.7KW | 17A | 211X117.5X137 | B | |
| SHBF700-02S5.5G | 5.5KW | 25A | 259X148X167 | C | |
| SHBF700-02T0.75G | 3 phase 220V ±15% | 0.75KW | 3.8A | 155.5X85X106 | A |
| SHBF700-02T1.5G | 1.5KW | 5.1A | 155.5X85X106 | ||
| SHBF700-02T2.2G | 2.2KW | 9.6A | 155.5X85X106 | ||
| SHBF700-02T3.7G | 3.7KW | 17A | 211X117.5X137 | B | |
| SHBF700-02T5.5G | 5.5KW | 25A | 259X148X167 | C | |
| SHBF700-02T7.5G | 7.5KW | 32A | 259X148X167 | ||
| SHBF700-04T0.75G | 3 phase 380V ±15% | 0.75KW | 2.1A | 155.5X85X106 | A |
| SHBF700-04T1.5G | 1.5KW | 3.8A | 155.5X85X106 | ||
| SHBF700-04T2.2G | 2.2KW | 5.1A | 155.5X85X106 | ||
| SHBF700-04T3.0G | 3.0KW | 6.8A | 155.5X85X106 | ||
| SHBF700-04T4.0G | 4.0KW | 9A | 155.5X85X106 | ||
| SHBF700-04T5.5G | 5.5KW | 13A | 211X117.5X137 | B | |
| SHBF700-04T7.5G | 7.5KW | 17A | 211X117.5X137 | ||
| SHBF700-04T11G | 11KW | 25A | 259X148X167 | C | |
| SHBF700-04T15G | 15KW | 32A | 259X148X167 |
Structure Diagram
Frequently Asked Questions (FAQ)
What control modes do these frequency inverters support?
The series supports Linear V/F control, square V/f control, V/F separation mode, and SVPWM modulation.
What is the overload capacity of the G and P models?
G models feature an overload capacity of 150% for 60 seconds and 180% for 3 seconds. P models support 120% overload for 60 seconds and 150% overload for 3 seconds.
What input voltage options are available in this inverter series?
The supported input voltage ranges include single-phase 220V, three-phase 220V, three-phase 380V, and three-phase 480V with a tolerance of ±15%.
Does the inverter support multi-stage speed control and simple PLC functions?
Yes, it supports simple PLC applications, PID control, and multi-stage speed control configurations (both 8-stage and 16-stage speed control).
What built-in protection features are included for safety?
The inverter provides comprehensive protection, including short circuit protection (non-exploding), software and fast current limiting, overtemperature, overvoltage, undervoltage, and input/output phase loss protection.